November 2007 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Nov 1 01:54:58 CST 2007
Ending: Fri Nov 30 20:47:32 CST 2007
Messages: 472

• warning on compilation of kernel & another question device driver related   Luís Cargnini
• warning on compilation of kernel & another question device driver related   Luís Cargnini
• trying to read McBSP   Luís Cargnini
• [PATCH] include/asm-arm/arch-omap/omap24xx.h   Luís Cargnini
• [PATCH]include/asm-arm/arch-omap/omap24xx.h   Luís Cargnini
• reading MCBSP, pollread returning error   Luís Cargnini
• problems during copy_to_user   Luís Cargnini
• problems during copy_to_user   Luís Cargnini
• reading MCBSP, pollread returning error   Luís Cargnini
• [PATCH 01/14] MMC: OMAP: Introduce new structs for mmc multislot support   Carlos Aguiar
• [PATCH 04/14] MMC: OMAP: Power functions modified to MMC multislot support   Carlos Aguiar
• [PATCH 0/3] MMC: OMAP: Adds MMC support for Siemens SX1 mobile phones   Carlos Aguiar
• [PATCH 0/1] OMAP: DMA: Attribution necessary only if the ch is not chained.   Carlos Aguiar
• [PATCH 1/1] OMAP: DMA: Attribution necessary only if the ch is not chained.   Carlos Aguiar
• [PATCH 00/17] MMC: OMAP: Add MMC multislot support   Carlos Aguiar
• [PATCH 01/17] MMC: OMAP: Introduce new structs for mmc multislot support   Carlos Aguiar
• [PATCH 02/17] MMC: OMAP: New release dma and abort xfer functions   Carlos Aguiar
• [PATCH 03/17] MMC: OMAP: Fix timeout calculation for MMC multislot support   Carlos Aguiar
• [PATCH 04/17] MMC: OMAP: Power functions modified to MMC multislot support   Carlos Aguiar
• [PATCH 05/17] MMC: OMAP: General cleanup for MMC multislot support   Carlos Aguiar
• [PATCH 06/17] MMC: OMAP: Abort stuck commands   Carlos Aguiar
• [PATCH 07/17] MMC: OMAP: Using setup_timer instead of init_timer   Carlos Aguiar
• [PATCH 08/17] PLAT: OMAP: Modifications at devices.c and mmc.h to use multislot structures   Carlos Aguiar
• [PATCH 09/17] MMC: OMAP: Modifications at N800 MMC board specific file to work MMC multislot support   Carlos Aguiar
• [PATCH 10/17] MMC: OMAP: Enabling MMC/SD card support option on n800_defconfig   Carlos Aguiar
• [PATCH 11/17] MMC: OMAP: Supporting MMC multislot structures for TI OMAP H3 board   Carlos Aguiar
• [PATCH 12/17] MMC: OMAP: Make board-h3.c uses new board-h3-mmc.c code   Carlos Aguiar
• [PATCH 13/17] MMC: OMAP: Supporting MMC multislot structures for TI OMAP H2 board   Carlos Aguiar
• [PATCH 14/17] MMC: OMAP: Make board-h2.c uses new board-h2-mmc.c code   Carlos Aguiar
• [PATCH 15/17] MMC: OMAP: Supporting MMC multislot structures for Siemens SX1 board   Carlos Aguiar
• [PATCH 16/17] MMC: OMAP: Make board-sx1.c uses new board-sx1-mmc.c code   Carlos Aguiar
• [PATCH 17/17] MMC: OMAP: Adds MMC basic support for Siemens SX1   Carlos Aguiar
• [PATCH] OMAP: Update n800_defconfig   Carlos Aguiar
• [PATCH 0/1] ARM: OMAP: Fix Siemens SX1 building failure   Carlos Aguiar
• [PATCH 1/1] ARM: OMAP: Fix Siemens SX1 building failure   Carlos Aguiar
• [PATCH 0/2] MMC: OMAP: Adds MMC multislot support for Siemens SX1 mobile phones   Carlos Aguiar
• [PATCH 1/2] MMC: OMAP: Supporting MMC multislot structures for Siemens SX1 board   Carlos Aguiar
• [PATCH 2/2] MMC: OMAP: Make board-sx1.c uses new board-sx1-mmc.c code   Carlos Aguiar
• [PATCH 0/1] ARM: OMAP: Remove unnecessary N800 PM board specific file   Carlos Aguiar
• [PATCH 1/1] ARM: OMAP: Remove unnecessary N800 PM board specific file   Carlos Aguiar
• [PATCH 1/1] ARM: OMAP: Fix typo in arch/arm/mach-omap2/board-n800.h   Carlos Aguiar
• About the status of USB support on OMAP2430 SDP   Aguilar Pena, Leed
• [PATCH 1/2] ARM: OMAP2: Camera: Update camera driver for correct use of API's   Sakari Ailus
• [PATCH] OMAP2: Camera: Adapt to use new videobuf and scatterlist code   Sakari Ailus
• OMAP H3: compile error SEGMENT_SIZE undeclared   Francisco Alecrim
• Move linux-omap list over to vger?   Felipe Balbi
• [RFC] Misc cleanups   Felipe Balbi
• [RFC patch] I2C: TWL4030: Remove unneded pr_err define   Felipe Balbi
• [RFC patch] ARM: OMAP: Fix typo in drivers/usb/musb/Kconfig   Felipe Balbi
• [RFC patch] ARM: OMAP: Define OMAP34XX_HS_BASE   Felipe Balbi
• [RFC] Misc cleanups   Felipe Balbi
• [RFC patch] I2C: TWL4030: Remove unneded pr_err define   Felipe Balbi
• [RFC patch] ARM: OMAP: Fix typo in drivers/usb/musb/Kconfig   Felipe Balbi
• [RFC patch] ARM: OMAP: Define OMAP34XX_HS_BASE   Felipe Balbi
• [PATCH] - onenand - OMAP3 support - Kconfig update   Felipe Balbi
• [RFC patch] ARM: OMAP: Fix typo in drivers/usb/musb/Kconfig   Felipe Balbi
• [RFC patch] ARM: OMAP: Fix typo in drivers/usb/musb/Kconfig   Felipe Balbi
• Move linux-omap list over to vger?   Felipe Balbi
• [RFC patch] ARM: OMAP: Define OMAP34XX_HS_BASE   Felipe Balbi
• [PATCH RESEND] OMAP: DMA: Cleanup of DMA Request Lines   Felipe Balbi
• 3430SDP USB driver   Felipe Balbi
• [PATCH] ARM: OMAP: MACH-OMAP1: Fix compilation issues for OMAP1   Felipe Balbi
• [PATCH: Resending] - onenand - OMAP3 support - Kconfig update   Felipe Balbi
• [PATCH: Resending] - onenand - OMAP3 support - Kconfig update   Felipe Balbi
• "Free" DSP tools   Philip Balister
• OMAP 5912: new kernel, how to create a new file system?   Philip Balister
• [PATCH] ARM: OMAP: Fix usb gadget related compile errors and typo   Dirk Behme
• [PATCH] include/asm-arm/arch-omap/omap24xx.h   Dirk Behme
• Move linux-omap list over to vger?   Dirk Behme
• [PATCH 0/3] MMC: OMAP: Adds MMC support for Siemens SX1 mobile phones   Dirk Behme
• [PATCH 0/5] T2 related patches: i2c/twl/TS/KP   Dirk Behme
• [PATCH 0/4] Runtime constants: define (some) OMAP address bases at runtime rather than compile time for multiboot   Dirk Behme
• Audio Specifications   Dirk Behme
• Pending October/November patches   Dirk Behme
• [PATCH] ARM: OMAP: MACH-OMAP1: Fix compilation issues for OMAP1   Dirk Behme
• Switching to vger mailing list, was: [PATCH] ARM: OMAP: MACH-OMAP1: Fix compilation issues for OMAP1   Dirk Behme
• Switching to vger mailing list   Dirk Behme
• Unhandled fault: external abort   Carl Benson
• Unhandled fault: external abort   Carl Benson
• GIT repository   Carl Benson
• 3430SDP USB driver   Carl Benson
• 3430SDP USB driver   Carl Benson
• audio options on 3430 ES1.0 SDP   Carl Benson
• [PATCH 1/3] ARM: OMAP: Add helper module for board specific I2C bus registration   David Brownell
• [PATCH 2/3] ARM: OMAP: Use I2C bus registration helper   David Brownell
• [PATCH] fix NULL pointer with MUSB and DMA on ISO ep   David Brownell
• USB device DMA support on OMAP2   David Brownell
• [PATCH 2/3] ARM: OMAP: Use I2C bus registration helper   David Brownell
• [PATCH 1/3] ARM: OMAP: Add helper module for board specific I2C bus registration   David Brownell
• [Question] Always got STALL in MUSB Host driver   David Brownell
• [patch 0/2 2.6.24-rc1-git] OMAP and gpiolib   David Brownell
• [Question] Always got STALL in MUSB Host driver   David Brownell
• [Question] Always got STALL in MUSB Host driver   David Brownell
• Question About __REG32 marco   David Brownell
• Question About __REG32 marco   David Brownell
• OMAP2430: MUSB: Ethernet Gadget Issue   David Brownell
• [patch 2.6.24-rc3-omap1] i2c init section fixes   David Brownell
• [patch 2.6.24-rc3-omap1] tsc210x build fixes   David Brownell
• 3430SDP USB driver   David Brownell
• [Question] Can g_midi run on musb_gadget?   David Brownell
• ALSA support for H2 board   David Brownell
• [PATCH] OMAP: MUSB: MUSB fix to work as Module for 24xx/Davinci   David Brownell
• [PATCH-REWORKED] OMAP: MUSB: MUSB gadget fix   David Brownell
• OMAP2430: MUSB: Ethernet Gadget Issue   David Brownell
• [PATCH] OMAP: MUSB: MUSB fix to work as Module for 24xx/Davinci   David Brownell
• [PATCH] OMAP: MUSB: MUSB fix to work as Module for 24xx/Davinci   David Brownell
• ALSA support for H2 board   David Brownell
• ALSA support for H2 board   David Brownell
• [PATCH 1/5] mach:omap: some correction in Clock 34XX   Choraria, Rohit
• [PATCH] ARM: OMAP: Warm reset functionality for 34xx   Choraria, Rohit
• [PATCH] ARM: OMAP: VMALLOC Size   Choraria, Rohit
• [PATCH] OMAP: FLASH: Move Flash specific device info in a separate board file   Choraria, Rohit
• [PATCH RESEND] OMAP: DMA: Cleanup of DMA Request Lines   Choraria, Rohit
• [PATCH 1/2] DSP: Move code to use only one dsp_common.h   Hiroshi DOYU
• [PATCH 1/2] DSP: Move code to use only one dsp_common.h   Hiroshi DOYU
• ALSA support for H2 board   Carlos Davila
• ALSA support for H2 board   Carlos Davila
• OMAP2430: MUSB: Ethernet Gadget Issue   Foale, Jeff
• [PATCH 1/4] OMAP: DMA: Cleanup of DMA Request Lines   Gadiyar, Anand
• [RFC patch] ARM: OMAP: Fix typo in drivers/usb/musb/Kconfig   Gadiyar, Anand
• [RFC patch] ARM: OMAP: Fix typo in drivers/usb/musb/Kconfig   Gadiyar, Anand
• [PATCH 1/4] OMAP: DMA: Cleanup of DMA Request Lines   Gadiyar, Anand
• [PATCH RESEND] OMAP: DMA: Cleanup of DMA Request Lines   Gadiyar, Anand
• [PATCH] ARM: OMAP: Fix typo in arch/arm/mach-omap2/clock34xx.h   Gadiyar, Anand
• [PATCH] OMAP: USB: Fix compile warnings in board-2430sdp-usb.c   Gadiyar, Anand
• [PATCH] [MUSB] fix bug: when no USB device is plugged into theport of EZKIT-BF548, USB OTG host mode got BUG()   Gadiyar, Anand
• [PATCH Resending 0/3] OMAP: id/silicon rev check and omap24xx.h cleanup   Girish
• [PATCH 1/3] CPU identification support for 3430   Girish
• [PATC 2/3] silicon revision check for OMAP2/3   Girish
• [PATCH 3/3] arch:omap[2/3]4xx.h macro-defines cleanup   Girish
• [PATCH 0/5] T2 related patches: i2c/twl/TS/KP   Girish
• [PATCH 1/5] mach:omap: some correction in Clock 34XX   Girish
• [PATCH 2/5] I2C support on 3430   Girish
• [PATCH 3/5] TWL4030-Core support on 3430   Girish
• [PATCH 4/5] Touch Screen: support on OMAP 3430   Girish
• [PATCH 5/5]Twl4030- Keypad support on OMAP 3430   Girish
• [PATCH 2/3: Resending] silicon revision check for OMAP2/3   Girish
• [PATC 2/3] silicon revision check for OMAP2/3   Girish
• [PATCH 3/3: Resending] arch:omap[2/3]4xx.h macro-defines cleanup   Girish
• [RFC][PATCH] ARM: OMAP: Always enable the R/W access to allinitiators in sram   Girish
• SPI slave / receive w/ DMA failing   Heilpern, Mark
• Peculiar Behaviour of the GPIO Program   Krishna Prasad Herur
• [PATCH] ARM: OMAP: clk_disable_unused: init section mismatch   Kevin Hilman
• [PATCH/RFC 2] ARM: OMAP: implement CPUfreq frequency table based on PRCM table   Kevin Hilman
• [PATCH] ARM: OMAP: 2430: add serial console ATAG   Kevin Hilman
• warning on compilation of kernel & another question device driver related   Kevin Hilman
• [PATCH/RFC] ARM: OMAP: re-organize duplicated 32k-timer code   Kevin Hilman
• [PATCH/RFC] ARM: OMAP2: PRCM: more init, and clear wakeup events.   Kevin Hilman
• [PATCH resend] ARM: OMAP: clk_disable_unused: init section mismatch   Kevin Hilman
• warning on compilation of kernel & another question device driver related   Kevin Hilman
• [PATCH 0/3] 32k timer reorg   Kevin Hilman
• [PATCH 1/3] ARM: OMAP: re-organize duplicated 32k-timer code   Kevin Hilman
• [PATCH 2/3] ARM: OMAP: Move 32k-based sched_clock() to common code   Kevin Hilman
• [PATCH 3/3] ARM: OMAP: Move timer32k to mach-omap1   Kevin Hilman
• [PATCH 2/3] ARM: OMAP: Move 32k-based sched_clock() to common code   Kevin Hilman
• [PATCH 0/3] 32k timer reorg   Kevin Hilman
• [PATCH 0/4] 32k timer reorg and sched_clock cleanup   Kevin Hilman
• [PATCH 1/4] ARM: OMAP: re-organize duplicated 32k-timer code   Kevin Hilman
• [PATCH 2/4] ARM: OMAP: Move 32k-based sched_clock() to common code   Kevin Hilman
• [PATCH 3/4] ARM: OMAP: Remove MPU-timer based sched_clock()   Kevin Hilman
• [PATCH 4/4] ARM: OMAP: Move timer32k to mach-omap1   Kevin Hilman
• 3430 and UART3 parent clocks   Kevin Hilman
• [PATCH 0/2] OMAP3 updates for 32k timer reorg   Kevin Hilman
• [PATCH 1/2] ARM: OMAP: Need to enable 32k-sync clock   Kevin Hilman
• [PATCH 2/2] ARM: OMAP: Update 32k sync timer for OMAP3   Kevin Hilman
• 3430 and UART3 parent clocks   Kevin Hilman
• [PATCH 0/5] SRAM patcher: patch register addresses in SRAM code at runtime   Kevin Hilman
• Move linux-omap list over to vger?   Kevin Hilman
• [PATCH] ARM: OMAP: implement CPUfreq frequency table based on PRCM table   Kevin Hilman
• [PATCH] ARM: OMAP: implement CPUfreq frequency table based on PRCM table   Kevin Hilman
• [PATCH 0/4] Runtime constants: define (some) OMAP address bases at runtime rather than compile time for multiboot   Kevin Hilman
• 3430 and UART3 parent clocks   Kevin Hilman
• Unhandled fault: external abort   Kevin Hilman
• [PATCH] ARM: OMAP: Fix PER_MOD ICLKs for 3430   Kevin Hilman
• Unhandled fault: external abort   Kevin Hilman
• 3430 and UART3 parent clocks   Kevin Hilman
• [PATCH] ARM: OMAP: Enable OMAP3 SDRC clock on init.   Kevin Hilman
• [PATCH] ARM: OMAP: Enable OMAP3 SDRC clock on init.   Kevin Hilman
• [PATCH] ARM: OMAP: Enable OMAP3 SDRC clock on init.   Kevin Hilman
• [PATCH 3/4] ARM: OMAP: Remove MPU-timer based sched_clock()   Kevin Hilman
• [PATCH 3/4] ARM: OMAP: Remove MPU-timer based sched_clock()   Kevin Hilman
• 2430 download problem   Hunter, Jon
• OMAP 5912: new kernel, how to create a new file system?   Hunter, Jon
• OMAP2430: MUSB: Ethernet Gadget Issue   Hunter, Jon
• Obsolete omap watchdog files   Iqbal
• [PATCH] Re-enable watchdog menuconfig   Iqbal
• GIT repository   Iqbal
• [PATCH] Re-enable watchdog menuconfig   Kamat, Nishant
• [Question] Always got STALL in MUSB Host driver   Nazim Khan
• [Question] Always got STALL in MUSB Host driver   Nazim Khan
• [Question] Always got STALL in MUSB Host driver   Nazim Khan
• [PATCH] 3430: Make naming consistent in io.h   Amit Kucheria
• ads7846: data read from tsc2046 are all zeros   Juha Kuikka
• Nokia N810 support   Lauri Leukkunen
• [PATCH] OMAP: Initial N810 support   Lauri Leukkunen
• [PATCH] OMAP: Add temporary NOKIA_N810 machine type   Lauri Leukkunen
• [PATCH] OMAP: Update n800_defconfig   Lauri Leukkunen
• Nokia N810 support   Lauri Leukkunen
• [PATCH 4/4] OMAP: DMA: Added support for DMA chaining   Tony Lindgren
• [PATCH] include/asm-arm/arch-omap/omap24xx.h   Tony Lindgren
• [PATCH] ARM: OMAP: compile-fixes for PM debug   Tony Lindgren
• [PATCH] ARM: OMAP: Fix usb gadget related compile errors and typo   Tony Lindgren
• [PATCH 0/3] CBUS: retu-headset updates   Tony Lindgren
• [PATCH] ARM: OMAP: Update PRCM rate-table entries for 2430   Tony Lindgren
• [PATCH 2/2] silicon revision check for OMAP2/3   Tony Lindgren
• [PATCH] ARM: OMAP: IRQ numbers updated for 24xx and 34xx   Tony Lindgren
• [PATCH/RFC] ARM: OMAP: implement CPUfreq frequency table based on PRCM table   Tony Lindgren
• [PATCH 08/14] PLAT: OMAP: Modifications at devices.c to use multislot structures   Tony Lindgren
• [PATCH 1/3] ARM: OMAP: Add helper module for board specific I2C bus registration   Tony Lindgren
• [PATCH] include/asm-arm/arch-omap/omap24xx.h   Tony Lindgren
• Obsolete omap watchdog files   Tony Lindgren
• [PATCH 2/6] OMAP: Update ov9640 ifparm for H3 board.   Tony Lindgren
• [PATCH 1/4] OMAP: DMA: Cleanup of DMA Request Lines   Tony Lindgren
• [PATCH 1/4] OMAP: DMA: Cleanup of DMA Request Lines   Tony Lindgren
• [PATCH] LED: OMAP PWM: Use work queue for brightness   Tony Lindgren
• [PATCH 3/3: Resending] arch:omap[2/3]4xx.h macro-defines cleanup   Tony Lindgren
• [PATCH 2/3: Resending] silicon revision check for OMAP2/3   Tony Lindgren
• [PATCH 1/3] CPU identification support for 3430   Tony Lindgren
• Move linux-omap list over to vger?   Tony Lindgren
• [Question] Always got STALL in MUSB Host driver   Tony Lindgren
• [patch 0/2 2.6.24-rc1-git] OMAP and gpiolib   Tony Lindgren
• [PATCH] ARM: OMAP: Fix usb gadget related compile errors and typo   Tony Lindgren
• [PATCH] ARM: OMAP: clk_disable_unused: init section mismatch   Tony Lindgren
• [PATCH/RFC 2] ARM: OMAP: implement CPUfreq frequency table based on PRCM table   Tony Lindgren
• [PATCH] ARM: OMAP: 2430: add serial console ATAG   Tony Lindgren
• [PATCH] fix NULL pointer with MUSB and DMA on ISO ep   Tony Lindgren
• [PATCH resend] ARM: OMAP: clk_disable_unused: init section mismatch   Tony Lindgren
• [PATCH 1/5] mach:omap: some correction in Clock 34XX   Tony Lindgren
• [PATCH] OMAP: Fix the BYTEBLOCK capability removal   Tony Lindgren
• [PATCH]include/asm-arm/arch-omap/omap24xx.h   Tony Lindgren
• [PATCH] ARM: OMAP: Warm reset functionality for 34xx   Tony Lindgren
• [PATCH] CBUS: Do not BUG_ON in retu-headset in case of spurious release event   Tony Lindgren
• [PATCH/RFC 0/3 rev 3] I2C bus registration helper   Tony Lindgren
• [PATCH 2/5] I2C support on 3430   Tony Lindgren
• [PATCH 0/2] 3430 clock: REVISED: Add SmartReflex, emulation, trace clocks   Tony Lindgren
• [PATCH] 3430: Make naming consistent in io.h   Tony Lindgren
• Move linux-omap list over to vger?   Tony Lindgren
• [PATCH] ARM: OMAP: implement CPUfreq frequency table based on PRCM table   Tony Lindgren
• [PATCH 0/2] I2C and TWL4030 suport on 34xx   Tony Lindgren
• [PATCH 4/5] Touch Screen: support on OMAP 3430   Tony Lindgren
• [PATCH 5/5]Twl4030- Keypad support on OMAP 3430   Tony Lindgren
• [PATCH 0/5] SRAM patcher: patch register addresses in SRAM code atruntime   Tony Lindgren
• [PATCH] ARM: OMAP: implement CPUfreq frequency table based on PRCM table   Tony Lindgren
• [PATCH] ARM: OMAP: Fix compiler error when I2C_OMAP is not set   Tony Lindgren
• [PATCH] ARM: OMAP: VMALLOC Size   Tony Lindgren
• [PATCH]Watchdog: Fix for the watchdog reset issue on OMAP3   Tony Lindgren
• [PATCH/RFC] ARM: OMAP2: PRCM: more init, and clear wakeup events.   Tony Lindgren
• [PATCH 3/3] arch:omap[2/3]4xx.h macro-defines cleanup   Tony Lindgren
• Move linux-omap list over to vger?   Tony Lindgren
• Move linux-omap list over to vger?   Tony Lindgren
• Move linux-omap list over to vger?   Tony Lindgren
• [PATCH 1/4] OMAP: DMA: Cleanup of DMA Request Lines   Tony Lindgren
• [PATCH 3/4] ARM: OMAP: Remove MPU-timer based sched_clock()   Tony Lindgren
• [PATCH 3/4] ARM: OMAP: Remove MPU-timer based sched_clock()   Tony Lindgren
• [PATCH 0/2] OMAP3 updates for 32k timer reorg   Tony Lindgren
• [PATCH] Remove unused and broken core_l3_ck clk_get from board-3430sdp.c   Tony Lindgren
• [PATCH] ARM: OMAP: Fix PER_MOD ICLKs for 3430   Tony Lindgren
• [PATCH] ARM: OMAP: Enable OMAP3 SDRC clock on init.   Tony Lindgren
• [PATCH] ARM: OMAP: USB: Define OMAP34XX_HSUSB_OTG_BASE   Tony Lindgren
• [PATCH] flush I-cache after omap_sram_push()   Tony Lindgren
• [PATCH] OMAP: Moving TWL id for i2c in board files   Tony Lindgren
• [PATCH: Resending] - onenand - OMAP3 support - Kconfig update   Tony Lindgren
• [PATCH] OMAP: FLASH: Move Flash specific device info in a separate board file   Tony Lindgren
• [PATCH] OMAP2: Camera: Adapt to use new videobuf and scatterlist code   Tony Lindgren
• [PATCH RESEND] OMAP: DMA: Cleanup of DMA Request Lines   Tony Lindgren
• [PATCH] ARM: OMAP: Fix typo in arch/arm/mach-omap2/clock34xx.h   Tony Lindgren
• [PATCH] OMAP: USB: Fix compile warnings in board-2430sdp-usb.c   Tony Lindgren
• [PATCH RESEND 0/4] Runtime constants: define (some) OMAP address bases at runtime rather than compile time for multiboot   Tony Lindgren
• [PATCH 3/4] ARM: OMAP: Remove MPU-timer based sched_clock()   Tony Lindgren
• [RFC][PATCH] ARM: OMAP: Always enable the R/W access to all initiators in sram   Tony Lindgren
• [PATCH 17/17] MMC: OMAP: Adds MMC basic support for Siemens SX1   Tony Lindgren
• [PATCH] ARM: OMAP: MACH-OMAP1: Fix compilation issues for OMAP1   Tony Lindgren
• [PATCH 3/4] ARM: OMAP: Remove MPU-timer based sched_clock()   Tony Lindgren
• [PATCH 00/17] MMC: OMAP: Add MMC multislot support   Tony Lindgren
• Nokia N810 support   Tony Lindgren
• [PATCH] OMAP: Update n800_defconfig   Tony Lindgren
• [PATCH] OMAP: Add temporary NOKIA_N810 machine type   Tony Lindgren
• [PATCH 1/1] OMAP: DMA: Attribution necessary only if the ch is not chained.   Tony Lindgren
• [PATCH] initial musb urb fixes to make it work again   Tony Lindgren
• [PATH 0/3] ARM: OMAP1: Camera: Updates API usage and removes unused files   Tony Lindgren
• [PATCH 1/2] DSP: Move code to use only one dsp_common.h   Tony Lindgren
• [PATCH 2/2] DSP: Move dspgateway to drivers/dsp/dspgateway   Tony Lindgren
• [PATCH 1/2] DSP: Move code to use only one dsp_common.h   Tony Lindgren
• [PATCH 00/17] MMC: OMAP: Add MMC multislot support   Tony Lindgren
• [PATCH] OMAP: Update n800_defconfig   Tony Lindgren
• [patch 2.6.24-rc3-omap1] i2c init section fixes   Tony Lindgren
• [patch 2.6.24-rc3-omap1] tsc210x build fixes   Tony Lindgren
• [PATCH: Resending] - onenand - OMAP3 support - Kconfig update   Tony Lindgren
• [PATCH 1/4] OMAP: Resubmitting support for 2K page nand   Tony Lindgren
• [PATCH 1/2] DSP: Move code to use only one dsp_common.h   Tony Lindgren
• Switching to vger mailing list, was: [PATCH] ARM: OMAP: MACH-OMAP1: Fix compilation issues for OMAP1   Tony Lindgren
• [PATCH 1/2] DSP: Move code to use only one dsp_common.h   Tony Lindgren
• [PATCH 1/2] DSP: Move code to use only one dsp_common.h   Tony Lindgren
• [PATH 0/3] ARM: OMAP1: Camera: Updates API usage and removes unused files   Tony Lindgren
• [PATCH] ARM: OMAP: Check the get_cover_state function pointer if not set   Tony Lindgren
• [PATCH] ARM: OMAP: Make dummy wrapper if the OMAP_GPIO_SWITCH is not set   Tony Lindgren
• [PATCH 1/1] ARM: OMAP: Fix Siemens SX1 building failure   Tony Lindgren
• [PATCH 0/2] MMC: OMAP: Adds MMC multislot support for Siemens SX1 mobile phones   Tony Lindgren
• [PATCH 0/1] ARM: OMAP: Remove unnecessary N800 PM board specific file   Tony Lindgren
• [PATCH] Re-enable watchdog menuconfig   Russell King - ARM Linux
• H3 : Audio issue with mpg123   Mano
• Recommended source for H3   Mano
• Recommended source for H3   Mano
• Git kernel multimedia drivers   Maximus
• status of camera port?   Maximus
• HDQ/1-wire module   Nishanth Menon
• [PATCH 2/3] ARM: OMAP: Use I2C bus registration helper   Nishanth Menon
• OSK5912 GPIO   Azhar Mr.
• Audio Specifications   Azhar Mr.
• OSK5912 GPIO   Azhar Mr.
• Peculiar Behaviour of the GPIO Program   Azhar Mr.
• Choice of Reference Design Board   Steve Mueller
• Choice of Reference Design Board   Steve Mueller
• [PATCH 1/3] ARM: OMAP: Add helper module for board specific I2C bus registration   Jarkko Nikula
• [PATCH 2/3] ARM: OMAP: Use I2C bus registration helper   Jarkko Nikula
• [PATCH/RFC 0/3 rev 2] I2C bus registration helper   Jarkko Nikula
• [PATCH 1/3] ARM: OMAP: Add helper module for board specific I2C bus registration   Jarkko Nikula
• [PATCH 2/3] ARM: OMAP: Use I2C bus registration helper   Jarkko Nikula
• [PATCH 3/3] ARM: OMAP: N800: Use I2C bus registration helper   Jarkko Nikula
• [PATCH 1/3] ARM: OMAP: Add helper module for board specific I2C bus registration   Jarkko Nikula
• [PATCH/RFC 0/3 rev 3] I2C bus registration helper   Jarkko Nikula
• [PATCH 1/3] ARM: OMAP: Add helper module for board specific I2C bus registration   Jarkko Nikula
• [PATCH 2/3] ARM: OMAP: Use I2C bus registration helper   Jarkko Nikula
• [PATCH 3/3] ARM: OMAP: N800: Use I2C bus registration helper   Jarkko Nikula
• [PATCH 2/3] ARM: OMAP: Use I2C bus registration helper   Jarkko Nikula
• [PATCH] V4L/DVB: Make Philips TEA5761 driver to compile   Jarkko Nikula
• [PATCH] CBUS: Do not BUG_ON in retu-headset in case of spurious release event   Jarkko Nikula
• [PATCH] ARM: OMAP: Fix compiler error when I2C_OMAP is not set   Jarkko Nikula
• [PATCH RESEND 0/4] Runtime constants: define (some) OMAP address bases at runtime rather than compile time for multiboot   Jarkko Nikula
• [PATCH RESEND 0/4] Runtime constants: define (some) OMAP address bases at runtime rather than compile time for multiboot   Jarkko Nikula
• [patch 2.6.24-rc3-omap1] i2c init section fixes   Jarkko Nikula
• [PATCH] OMAP: MUSB: MUSB gadget fix   Pandita, Vikram
• [PATCH] OMAP: MUSB: MUSB fix to work as Module for 24xx/Davinci   Pandita, Vikram
• [PATCH-REWORKED] OMAP: MUSB: MUSB gadget fix   Pandita, Vikram
• [PATCH] ARM: OMAP: USB: Define OMAP34XX_HSUSB_OTG_BASE   Pandita, Vikram
• 3430SDP USB driver   Pandita, Vikram
• 3430SDP USB driver   Pandita, Vikram
• [PATCH] OMAP: MUSB: MUSB fix to work as Module for 24xx/Davinci   Pandita, Vikram
• [PATCH] OMAP: MUSB: MUSB fix to work as Module for 24xx/Davinci   Pandita, Vikram
• [PATCH] OMAP: MUSB: MUSB fix to work as Module for 24xx/Davinci   Pandita, Vikram
• [PATCH] ARM: OMAP: OMAP2 USB DMA support   Kyungmin Park
• USB device DMA support on OMAP2   Kyungmin Park
• USB device DMA support on OMAP2   Kyungmin Park
• [PATCH] Register the L4 io bus to boot OMAP2   Kyungmin Park
• [PATCH] ARM: OMAP: Fix compiler error when I2C_OMAP is not set   Kyungmin Park
• [PATCH: Resending] - onenand - OMAP3 support - Kconfig update   Kyungmin Park
• [RFC][PATCH] ARM: OMAP: Always enable the R/W access to all initiators in sram   Kyungmin Park
• [RFC][PATCH] ARM: OMAP: Always enable the R/W access to all initiators in sram   Kyungmin Park
• [PATCH 00/17] MMC: OMAP: Add MMC multislot support   Kyungmin Park
• [PATCH 00/17] MMC: OMAP: Add MMC multislot support   Kyungmin Park
• [PATCH 00/17] MMC: OMAP: Add MMC multislot support   Kyungmin Park
• [PATCH 00/17] MMC: OMAP: Add MMC multislot support   Kyungmin Park
• [PATCH] ARM: OMAP: Check the get_cover_state function pointer if not set   Kyungmin Park
• [PATCH] ARM: OMAP: Make dummy wrapper if the OMAP_GPIO_SWITCH is not set   Kyungmin Park
• OMAP USB - ISO data_flush errors not handled? (OMAP 5912)   Steve Poulsen
• OMAP 5912: new kernel, how to create a new file system?   Mik Prog
• HDQ/1-wire module   Madhusudhan Chikkature Rajashekar
• DQBUF V4L2 Errors (camdma trasaction error?)   Ram
• [PATCH]Watchdog: Fix for the watchdog reset issue on OMAP3   Reddy, Teerth
• Onenand - sync burst read   Sameer
• [PATCH] - onenand - OMAP3 support - Kconfig update   Sameer
• [PATCH: Resending] - onenand - OMAP3 support - Kconfig update   Sameer
• [PATCH: Resending] - onenand - OMAP3 support - Kconfig update   Sameer
• [PATCH: Resending] - onenand - OMAP3 support - Kconfig update   Sameer
• [PATCH: Resending] - onenand - OMAP3 support - Kconfig update   Sameer
• Move linux-omap list over to vger?   Trilok Soni
• "Free" DSP tools   Trilok Soni
• [PATCH 2/2] ARM: OMAP2: Camera: Improve ov9640 code on board-h4.c   Trilok Soni
• status of camera port?   Trilok Soni
• status of camera port?   Trilok Soni
• [PATC 2/3] silicon revision check for OMAP2/3   Daniel Stone
• OSK5912 GPIO   Daniel Stone
• Nokia N810 support   Igor Stoppa
• Peculiar Behaviour of the GPIO Program   Igor Stoppa
• Move linux-omap list over to vger?   Syed Mohammed, Khasim
• audio options on 3430 ES1.0 SDP   Syed Mohammed, Khasim
• [PATCH 2/6] OMAP: Update ov9640 ifparm for H3 board.   Eduardo Valentin
• [PATH 0/2] ARM: OMAP2: Camera: Fixes compile errors and adds little improvements   Eduardo Valentin
• [PATCH 1/2] ARM: OMAP2: Camera: Update camera driver for correct use of API's   Eduardo Valentin
• [PATCH 2/2] ARM: OMAP2: Camera: Improve ov9640 code on board-h4.c   Eduardo Valentin
• [PATH 0/3] ARM: OMAP1: Camera: Updates API usage and removes unused files   Eduardo Valentin
• [PATCH 1/3] ARM: OMAP1: Camera: Update videobuf utilization   Eduardo Valentin
• [PATCH 2/3] ARM: OMAP1: Camera: Fix v4l2 int device detach   Eduardo Valentin
• [PATCH 3/3] ARM: OMAP1: Camera: Removes unused files   Eduardo Valentin
• [PATH 0/3] ARM: OMAP1: Camera: Updates API usage and removes unused files   Eduardo Valentin
• [PATCH 1/5] mach:omap: some correction in Clock 34XX   Paul Walmsley
• [PATCH] include/asm-arm/arch-omap/omap24xx.h   Paul Walmsley
• [PATCH 0/2] 3430 clock: Add SmartReflex, emulation, trace clocks   Paul Walmsley
• [PATCH 1/2] 3430 clock: revise SmartReflex clocks   Paul Walmsley
• [PATCH 2/2] 3430 clock: add emulation clocks   Paul Walmsley
• [PATCH 1/5] mach:omap: some correction in Clock 34XX   Paul Walmsley
• [PATCH 2/2] 3430 clock: add emulation clocks   Paul Walmsley
• [PATCH] include/asm-arm/arch-omap/omap24xx.h   Paul Walmsley
• [PATCH 0/2] 3430 clock: REVISED: Add SmartReflex, emulation, trace clocks   Paul Walmsley
• [PATCH 1/2] 3430 clock: revise SmartReflex clocks   Paul Walmsley
• [PATCH 2/2] 3430 clock: add emulation clocks   Paul Walmsley
• [PATCH/RFC] ARM: OMAP: re-organize duplicated 32k-timer code   Paul Walmsley
• [PATCH 0/5] SRAM patcher: patch register addresses in SRAM code at runtime   Paul Walmsley
• [PATCH 1/5] SRAM patcher: add SRAM virtual address patcher   Paul Walmsley
• [PATCH 2/5] SRAM patcher: convert omap24xx_sram_suspend to use runtime SRAM patcher   Paul Walmsley
• [PATCH 3/5] SRAM patcher: convert sram_ddr_init to use runtime SRAM patcher   Paul Walmsley
• [PATCH 4/5] SRAM patcher: convert sram_reprogram_sdrc to use runtime SRAM patcher   Paul Walmsley
• [PATCH 5/5] SRAM patcher: convert omap2_set_prcm to use runtime SRAM patcher   Paul Walmsley
• 3430 and UART3 parent clocks   Paul Walmsley
• 3430 and UART3 parent clocks   Paul Walmsley
• [PATCH 1/5] mach:omap: some correction in Clock 34XX   Paul Walmsley
• Move linux-omap list over to vger?   Paul Walmsley
• [PATCH 0/5] SRAM patcher: patch register addresses in SRAM code atruntime   Paul Walmsley
• [PATCH 0/4] Runtime constants: define (some) OMAP address bases at runtime rather than compile time for multiboot   Paul Walmsley
• [PATCH 1/4] Runtime constants: introduce omap2_set_globals_*()   Paul Walmsley
• [PATCH 2/4] Runtime constants: use runtime-computed SDRC base   Paul Walmsley
• [PATCH 3/4] Runtime constants: use runtime-computed SMS base   Paul Walmsley
• [PATCH 4/4] Runtime constants: use runtime-computed system control module base   Paul Walmsley
• [PATCH] Remove unused and broken core_l3_ck clk_get from board-3430sdp.c   Paul Walmsley
• [PATCH] flush I-cache after omap_sram_push()   Paul Walmsley
• [RFC patch] ARM: OMAP: Define OMAP34XX_HS_BASE   Paul Walmsley
• 3430 and UART3 parent clocks   Paul Walmsley
• [PATCH RESEND 0/4] Runtime constants: define (some) OMAP address bases at runtime rather than compile time for multiboot   Paul Walmsley
• [PATCH RESEND 1/4] Runtime constants: introduce omap2_set_globals_*()   Paul Walmsley
• [PATCH RESEND 2/4] Runtime constants: use runtime-computed SDRC base   Paul Walmsley
• [PATCH RESEND 3/4] Runtime constants: use runtime-computed SMS base   Paul Walmsley
• [PATCH RESEND 4/4] Runtime constants: use runtime-computed system control module base   Paul Walmsley
• [PATCH 0/4] Runtime constants: define (some) OMAP address bases at runtime rather than compile time for multiboot   Paul Walmsley
• [PATCH RESEND 0/4] Runtime constants: define (some) OMAP address bases at runtime rather than compile time for multiboot   Paul Walmsley
• [RFC][PATCH] ARM: OMAP: Always enable the R/W access to all initiators in sram   Paul Walmsley
• [RFC][PATCH] ARM: OMAP: Always enable the R/W access to all initiators in sram   Paul Walmsley
• [PATCH] improve System Control Module defines   Paul Walmsley
• [PATCH] Fix cpu_is_omap343x()   Paul Walmsley
• [PATCH] Clean up cpu.h for 24xx, 34xx   Paul Walmsley
• [PATCH 2/2] 3430 clock: add emulation clocks   Woodruff, Richard
• [PATCH 2/2] 3430 clock: add emulation clocks   Woodruff, Richard
• [PATCH 0/5] SRAM patcher: patch register addresses in SRAM code atruntime   Woodruff, Richard
• Choice of Reference Design Board   Woodruff, Richard
• [PATCH 0/5] SRAM patcher: patch register addresses in SRAM code atruntime   Woodruff, Richard
• Choice of Reference Design Board   Woodruff, Richard
• Question About __REG32 marco   Woodruff, Richard
• [PATCH] flush I-cache after omap_sram_push()   Woodruff, Richard
• [RFC][PATCH] ARM: OMAP: Always enable the R/W access to all initiators in sram   Woodruff, Richard
• [Question] Always got STALL in MUSB Host driver   Bryan Wu
• [Question] Can g_midi run on musb_gadget?   Bryan Wu
• [PATCH] [MUSB] fix bug: when no USB device is plugged into the port of EZKIT-BF548, USB OTG host mode got BUG()   Bryan Wu
• ads7846: data read from tsc2046 are all zeros   Yang, Xiaopeng
• ads7846: data read from tsc2046 are all zeros   Yang, Xiaopeng
• ads7846: data read from tsc2046 are all zeros   Yang, Xiaopeng
• [PATCH] fix NULL pointer with MUSB and DMA on ISO ep   Hunyue Yau
• TOUCH screen X and Y values   arun c
• gettimeofday on 2.6.9 on OMAP2420   k c
• OMAP2420 2.6.9 kernel + gettimeofday issue   k c
• unsubscribe   Joshua chen
• Question About __REG32 marco   colorant
• Question About __REG32 marco   colorant
• Question About __REG32 marco   colorant
• ALSA support for H2 board   comunerito
• [PATCH] OMAP: Fix the BYTEBLOCK capability removal   francisco.alecrim at indt.org.br
• 2430 download problem   jacky_wang
• status of camera port?   jacky_wang
• status of camera port?   jacky_wang
• [PATCH/RFC 0/3] I2C bus registration helper   jarkko.nikula at nokia.com
• [PATCH 1/3] ARM: OMAP: Add helper module for board specific I2C bus registration   jarkko.nikula at nokia.com
• [PATCH 2/3] ARM: OMAP: Use I2C bus registration helper   jarkko.nikula at nokia.com
• [PATCH 3/3] ARM: OMAP: N800: Use I2C bus registration helper   jarkko.nikula at nokia.com
• OMAP2430 RESET STANDBY GPIO can not set   shanghai
• [PATCH 1/5] mach:omap: some correction in Clock 34XX   Chandra shekhar
• [PATCH 0/2] I2C and TWL4030 suport on 34xx   Chandra shekhar
• [PATCH 1/2] I2C and TWL4030 suport on 34xx   Chandra shekhar
• [PATCH 2/2] I2C and TWL4030 suport on 34xx   Chandra shekhar
• [PATCH 0/5] T2 related patches: i2c/twl/TS/KP   Chandra shekhar
• [PATCH] OMAP: Moving TWL id for i2c in board files   Chandra shekhar
• [PATCH 1/4] OMAP: Resubmitting support for 2K page nand   sshahrom at micron.com
• DSP Gateway vs DSP/BIOS LINK   mobile sw
• TOUCH screen X and Y values   andrzej zaborowski
• OSK5912 GPIO   andrzej zaborowski

Last message date: Fri Nov 30 20:47:32 CST 2007
Archived on: Fri Nov 30 20:47:40 CST 2007

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...