From: Audio, Video and Graphics Working Group [mailto:AVGWG@LIST.CELINUXFORUM.ORG]On Behalf Of Imre Deak
Sent: Wednesday, May 26, 2004 7:11 PM
To: AVGWG@LIST.CELINUXFORUM.ORG
Subject: [AVGWG] OMAP H2 setup guide


Hi,

As I told in my previous message on this mailing list, I am working 
on Linux 2.6 on TI OMAP 1610 H2 development board.
During setting up the HW/SW environment I faced some problems which 
I described in a step by step guide. It may be useful to others, so I'm sending it hereby along with the patches I applied. I wanted to 
make this available many weeks earlier but internal non-technical issues prevented me from it. See the summary below for the SW/HW versions I used. Currently I'm working on the 2.6 OMAP fbdev code and would like to 
submit it to here in the near future.
I would appreciate any comments or questions you may have.

1. HW components

H2 Sample development kit:

-       H2 sample module
-       H2/P2 expansion board (Surfer board)
-       Multiport debug module
-       JTAG adapter board
-       Power supply for the kit
-       Cross-link Ethernet cable
-       RS232 null-modem cable

Lauterbach debug kit:

-       Power Debug Interface (LA-7702)
-       Podbus Parallel Interface (LA-7809)
-       JTAG-ARM9 ICD (LA-7742)
-       Power supply for PODPAR
-       Parallel cable

2. SW components

On the host:
-       Windows (2000)
-       Linux (2.6)
-       Lauterbach Trace32 debugger (Build 1190) (for Windows)
-       BitKeeper client (for Linux)
-       Kermit (for Linux)

For the target:
-       Linux-OMAP (2.6.6-omap1 http://linux-omap.bkbits.com )
-       ARM tool-chain (20031127 http://ftp.snapgear.org/pub/snapgear/tools/arm-linux )
-       U-Boot (1.1.1  http://u-boot.sourceforge.net )
-       uClibc (http://www.uclibc.org )

Regards,
Imre